Fujifilm PICTOGRAPHY 3500 Bedienungsanleitung PDF herunterladen (Seite 7)

This section explains various items that need to be set up before you can

use the printer driver.

2.1 Windows

2.1.1 Setting up the PICTROGRAPHY

The PICTROGRAPHY 3500 is shipped from the factory with its

device type set to [Printer]. To use the printer with Windows 95 (Ver-

sion 4.00.950 or 4.00.950a), the device type setting on the

PICTROGRAPHY 3500 primary unit must be changed to [Proces-

sor]. Notice that, if you attempt to use the printer without changing

this setting, Windows 95 will not operate properly.

For information on setting this parameter, see the PICTROGRAPHY

3500 instruction manual.

2.1.2 Installing the ASPI Manager

The printer driver requires a SCSI connection between the

PICTROGRAPHY 3500 and your computer. In turn, the SCSI inter-

face requires installation of the ASPI Manager software in addition

to the SCSI driver.

For information on installing the ASPI Manager, see the instruction

manual supplied with your SCSI interface adapter.

*With Windows 95 or Windows 98, ASPI Manager is automati-

cally installed along with system software. Note that ASPI Man-

ager is not automatically installed with Windows NT 4.0, Win-

dows 2000 or Windows XP. Even with Windows 95/98, we rec-

ommend manually installing the latest version of ASPI Manager

to improve software reliability.

* Use ASPI Manager Version 4.01 or later.

* If you are currently running Windows 2000 or Windows XP, in-

stall ASPI Manager Version 4.70 or later.

2.1.3 Network setup (for network printing)

If you plan to print across a network, you need to make the appropri-

ate network settings on your computer. This subsection covers only

the setup items required to this end. For information on setting these

parameters, see the instruction manual supplied with your copy of

Windows.

2.1.3.1 Setting up a PC to function as a server

•Windows 95/98:

Install a network protocol compatible with your network environ-

ment (e.g. TCP/IP).

To allow printer sharing, install the Microsoft network sharing ser-

vices and make the appropriate settings. Click [File and Printer

Sharing] in the [Network] dialog displayed when you double-click

the [Network] icon on the [Control Panel]. Check [Enable Printer

Sharing] and click [OK].

•Windows NT 4.0:

Install a protocol compatible with your network environment (e.g.

TCP/IP).

•Windows 2000

Install a network protocol compatible with your network environ-

ment (e.g. TCP/IP).

•Windows XP

Install a network protocol compatible with your network environ-

ment (e.g. TCP/IP).

2.1.3.2 Setting up a PC as a network client

Install the same protocol installed on the server.

2.2 Macintosh (Mac OS 9 or earlier)

2.2.1 Setting up AppleTalk (to enable network

printing)

You need to set up AppleTalk to enable network (Ethernet) printing.

Set up both the server and client computers for AppleTalk, specify-

ing [Ethernet] for the output path (port to be used).

For information on setting this parameter, refer to the Macintosh in-

struction manual.

2.2.2 Setup for file sharing (to enable network

printing)

Make the appropriate settings for file sharing if you plan to print

across a network (Ethernet).

These settings should permit client computers to access files on the

server. For these settings, refer to your Macintosh instruction manual.

2.3 Macintosh (Mac OS X)

You need to set up TCP/IP to enable network (Ethernet) printing.

Perform setup so as to permit the use of TCP/IP.

2. PRECAUTIONS FOR USING THE PRINTER DRIVER

1 2 3 4 5 6 7 8 9 10 11 12 ... 62 63

Kommentare zu diesen Handbüchern

Keine Kommentare

Fujifilm PICTOGRAPHY 3500 Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Fujifilm PICTOGRAPHY 3500