Fujifilm FinePix XP70 Bedienungshandbuch PDF herunterladen (Seite 11)

Product Features and Precautions for Use

■

Water, Dust, and Shock Resistance

Q The camera complies with JIS Class 8 water resistance and JIS Class 6 (IP68) dust resistance

standards, and has passed FUJIFILM drop tests (drop height: 1.5 m/4.9 ft.; impact surface:

plywood, thickness 5cm/2.0in.) compliant with MIL-STD 810F Method 516.5: Shock. These

results were obtained through in-house testing and are not a blanket guarantee of water

resistance or invulnerability to damage or destruction. The accessories supplied with the

camera are not water resistant.

■

Before Use

Inspect the water-resistant seal and adjacent surfaces and remove

any dust, sand, or other foreign matter using a soft, dry cloth.

Q Have the water-resistant seal replaced if it is deformed or

otherwise damaged (note that a fee is charged for this service;

contact your retailer or a FUJIFILM-authorized repair technician for

more information). Failure to replace the seal could result in leaks

and damage to the camera.

Holding the battery-chamber cover closed against the

camera body (

), rotate the latch until it clicks into place

(

), indicating that the cover is secure.

Check that the cover is secure by rotating the latch in the opposite direction and confirming

that the cover does not open.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 133 134

Keine Kommentare

Fujifilm FinePix XP70 Bedienungshandbuch Seite 11