Fujifilm E510 Bedienungsanleitung PDF herunterladen (Seite 42)

Viewing Images

6.1 CAMERA CONNECTION

Viewing

Images

Do not connect the AC power adapter to charge the

Ni-MH batteries. Use the optional charger (➡P94)

to charge the Ni-MH batteries.

Check that the camera is off. Plug the AC power

adapter connector into the “DC IN 3V” socket and

then plug the AC power adapter into the power

outlet.

●

The socket-outlet shall be installed near the equipment and

shall be easily accessible.

●

The shape of the plug and socket-outlet depends on the

country of use.

AC-3V

DC IN 3V

socket

Always use the FUJIFILM “AC Power Adapter AC-3V” or the “AC Power Adapter AC-3VW” bundled

with the PictureCradle CP-FXA10 (➡P.94).

Use the AC power adapter to avoid losing power at inconvenient times, such as when downloading

photographed images to your PC. You can take pictures and play back images without worrying

about depleting the batteries.

●

See P.99 for notes on using the AC power adapter.

●

When using the optional cradle, the AC power adapter bundled with the cradle must be used. The use of AC power

adapters other than the bundled product will cause faults.

●

Only connect or disconnect the AC power adapter when the camera is off.

Connecting or disconnecting the AC power adapter while the camera is on temporarily interrupts the power supply to the

camera, so that images or movies being shot are not recorded. Failing to turn the camera off first can also result in

damage to the xD-Picture Card or malfunctions during PC connection.

6.1.1 Using the AC Power adapter

(

sold separately

)

Turn off the camera and TV. Plug the A/V cable

(included) into the “A/V OUT” (Audio/Visual output)

socket.

Plug the other end of the cable into the video input

socket on the TV. Then turn the camera and TV on

and take pictures or play back images as you

would normally.

●

When there is a power outlet available, connect the AC

Power Adapter AC-3V.

●

Refer to the instructions provided with your TV for more

information on video input for your TV.

●

The image quality for movie playback is lower than for still

images.

6.1.2 Connecting to a TV

A/V OUT

(Audio / Visual output)

socket

DC IN 3V socket

Video (yellow)

Audio (white)

To terminals

AC-3V (sold separately)

(USB) socket

1Connect the camera to the printer using the USB

cable (included).

2Turn the printer on.

1Set the Mode switch to “w”.

2Press the “POWER” button to turn the camera

on.

“s” appears and then the menu is

displayed on the LCD monitor.

●

If the menu does not appear, check whether the USB mode

setting is

“®”.

●

Depending on the printer, some functions are disabled.

●

The camera cannot be used to specify printer settings such

as the paper size and print quality.

●

Please connect the AC Power Adapter AC-3V (sold

separately) or AC-3VW (included with optional PictureCradle

CP-FXA10) to your camera.

●

Use an xD-Picture Card that was formatted in the camera.

1Press the “POWER” button to turn the camera

on.

2Select “®” in “USB MODE” in the SET-UP

menu (➡P.69).

3Press the “POWER” button to turn the camera

off.

●

Do not connect to a PC when the USB mode setting is set to

“

®”. See P.105 if you connect to a PC by mistake.

ＦＲＡＭＥＮＯ．：ＣＯＮＴ．ＦＲＡＭＥＮＯ．：ＣＯＮＴ．

ＵＳＢＭＯＤＥＵＳＢＭＯＤＥ

言語言語

／ＬＡＮＧ．：ＥＮＧＬＩＳＨ／ＬＡＮＧ．：ＥＮＧＬＩＳＨ

ＳＥＴ−ＵＰＳＥＴ−ＵＰ

１

２

４

ＳＴＡＲＴ−ＩＭＡＧＥ：ＯＦＦ

ＳＥＴＳＥＴＣＡＮＣＥＬＣＡＮＣＥＬ

01 03

1Press “a” or “b” to select “u PRINT DPOF”.

2Press the “MENU/OK” button.

●

When “d” appears, the DPOF settings are not

specified.

●

To use DPOF printing, the DPOF settings must be specified

on FinePix E500 / FinePix E510 beforehand (➡P.61).

●

Even when “WITH DATE” is specified in the DPOF settings,

the date is not inserted from printers that do not support date

printing.

ＰＲＩＮＴＷＩＴＨＯＵＴＤＡＴＥＰＲＩＮＴＷＩＴＨＯＵＴＤＡＴＥ

ＰＲＩＮＴＷＩＴＨＤＡＴＥＰＲＩＮＴＷＩＴＨＤＡＴＥ

ＳＥＴＳＥＴ

ＰＩＣＴＢＲＩＤＧＥＰＩＣＴＢＲＩＤＧＥ

ＰＲＩＮＴＤＰＯＦＰＲＩＮＴＤＰＯＦ

01 02

ＣＨＥＣＫＩＮＧＵＳＢＣＨＥＣＫＩＮＧＵＳＢ

ＵＳＢＵＳＢ

When a printer that supports PictBridge is available, images can be printed by connecting the

camera directly to the PictBridge-compatible printer without using a PC.

●

In PictBridge function, images photographed on other than a camera may not be printed.

6.2

CONNECTING THE CAMERA DIRECTLY TO THE PRINTER

—

PictBridge FUNCTION

6.2.1

Specifying images for printing on the camera

Continued

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare

Fujifilm E510 Bedienungsanleitung Seite 42

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kameras Fujifilm E510