Fujifilm A330 Bedienungsanleitung PDF herunterladen (Seite 40)

Camera malfunction or fault.

i Turn the camera on again, taking care not

to touch the lens.

i Turn the camera off and on again. If the

message is still displayed, contact your

FUJIFILM dealer.

Displayed for PictBridge.

i Check that the USB cable is connected

properly.

i Check that your printer is turned on.

Displayed for PictBridge.

i Check that the printer is not out of paper

or out of ink.

i Turn the printer off briefly and then turn it

back on.

i Refer to the user manual supplied with

your printer.

Displayed for PictBridge. Check that the printer is not out of paper or

out of ink. Printing automatically restarts

when the error is cleared. If the error

message still appears after checking, press

the “MENU/OK” button to restart printing.

Displayed for PictBridge.

i Refer to the user manual for the printer

being used and check whether the printer

supports the JFIF-JPEG or Exif-JPEG

image format. If not, the printer cannot

print the image (s).

i Movie images cannot be printed.

i Was the image data photographed using

FinePix A330/FinePix A340?

You may not be able to print some images

photographed on other cameras.

Warning Displayed Explanation Remedy

Prints were specified for 1000 or

more frames in the DPOF frame

settings.

The maximum number of frames for which

prints can be specified on the same xD-

Picture Card is 999.

Copy the images for which you want to

order prints onto another xD-Picture Card

and then specify the DPOF settings.

Displayed for PictBridge. This message appears when printing is

performed from a FUJIFILM printer that

supports PictBridge. Refer to the user

manual for the printer for details.

Warning Displays eThe table below lists the warnings that are displayed on the LCD monitor.

(Lit red)

(Blinking red)

The batteries in the camera are fully

depleted or very low on charge.

Load new or fully charged batteries.

There is a strong likelihood of camera

shake because the shutter speed is

slow.

Use flash photography. However, use a

tripod for some scenes and modes.

Outside the AE continuous range. The picture can be taken, but the correct

brighthess (exposure) will not be obtained.

The AF (auto focus) cannot work

effectively.

i If the image is too dark, take the picture at

a distance of around 2 m (6.6 ft.) from the

subject.

i Use AF lock to take the picture.

No xD-Picture Card is inserted. Insert an xD-Picture Card.

i The xD-Picture Card is not

formatted.

i The xD-Picture Card contact area

is soiled.

i Camera fault.

i Format the xD-Picture Card in the

camera.

i Wipe the contact area on the xD-Picture

Card with a soft dry cloth. It may be

necessary to format the xD-Picture Card.

If the error message is still displayed,

replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

The xD-Picture Card is fully

recorded.

Erase some images or use an xD-Picture

Card that has ample free space.

i The file played back was not

recorded correctly.

i The xD-Picture Card contact area

is soiled.

i Camera fault.

i You attempted to play a movie that

was not recorded on this camera.

i Images cannot be played back.

i Wipe the contact area on the xD-Picture

Card with a soft dry cloth. It may be

necessary to format the xD-Picture Card.

If the error message is still displayed,

replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i Movies cannot be played back.

The frame number has reached

999–9999.

1 Insert a formatted xD-Picture Card into

the camera.

2 Set “RENEW” as the FRAME NO.

setting in the SET-UP menu.

3 Start taking pictures. (The frame

numbers start from “100-0001”.)

4 Set “CONT.” as the FRAME NO. setting

in the SET-UP menu.

Warning Displayed Explanation Remedy

i The xD-Picture Card contact area

is soiled.

i The xD-Picture Card is damaged.

i The xD-Picture Card format is

incorrect.

i Camera fault.

i Wipe the contact area on the xD-Picture

Card with a soft dry cloth. It may be

necessary to format the xD-Picture Card.

If the error message is still displayed,

replace the xD-Picture Card.

i Contact your FUJIFILM dealer.

i The data could not be recorded due

to an xD-Picture Card error or a

connection error between the xD-

Picture Card and camera.

i The image cannot be recorded as it

is too large to fit in the available

space on the xD-Picture Card.

i Re-insert the xD-Picture Card or turn the

camera off and then on again. If the error

message is still displayed, contact your

FUJIFILM dealer.

i Use a new xD-Picture Card.

A protected file was encountered. Protected files cannot be erased. Remove

the protection.

Movie selected in the DPOF settings. You cannot use DPOF to order prints of

movies.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47

Kommentare zu diesen Handbüchern

Keine Kommentare

Fujifilm A330 Bedienungsanleitung Seite 40

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kameras Fujifilm A330